
8
OMA46B
To LOOSEN tension adjusting nut,
turn counterclockwise.
REMOVING REAR WHEEL
1. Unlock Parking Brake
Prior to removing the rear wheels,
position the parking brake in the
unlocked position.
2. Open Quick Release Lever
Move the wheel’s quick release lever
from the locked or FULLY CLOSED
position to the FULLY OPEN position.
FULLY CLOSED
FULLY OPEN
3. Remove Wheel
Raise the wheel a few inches off the
ground and pull the wheel out of the
dropout.
FRONT WHEEL SECONDARY
RETENTION DEVICES
Your stroller fork utilizes secondary
wheel retention devices designed to
help keep the wheel from
disengaging from the fork if the quick
release is incorrectly adjusted and
tightened. The wheel can still remain
loose and wobbly even with the
secondary retention device working if
the quick release has not been
properly tightened and adjusted. The
secondary retention devices are
backup systems and are not intended
as a substitute for a properly
adjusted quick release. The
secondary retention devices on your
stroller are the integral type that are
formed into the outer faces of the
fork dropouts.
It is critical that you
do not remove or disable the
secondary retention devices. The
secondary retention devices serve
as a backup for a critical
adjustment. The secondary
retention devices can reduce the
risk of the wheel disengaging from
the fork if the quick release is not
adjusted and tightened correctly.
Removing or disabling the
secondary retention devices will
void the warranty.
Secondary retention devices are
not a substitute for correct quick
release adjustment and tightening.
Using your stroller with an
improperly adjusted and tightened
wheel quick release can allow
the wheel to vibrate, wobble or
become detached from the stroller.
This can result in serious injury or
death.
FULLY CLOSED
Dropouts
(Secondary Retention Devices)
Kommentare zu diesen Handbüchern